Tripoli Clinic’s healthcare fit-out included the supply and installation of HPL doors and hermetic doors by Daar Libya, alongside Forbo flooring, wall protection and ceiling works.

The project brings together two closely connected aspects of medical interiors: the systems people move through and the surfaces they use every day. Door openings, floor finishes, protective wall elements and ceilings each have their own requirements, while their connections need careful consideration.

Tripoli Clinic Project Scope

The following sections explain these work packages and the considerations behind them. ADAM patient rooms are also introduced as a related solution available through Daar Libya.

HPL Doors Supplied and Installed at Tripoli Clinic

Daar Libya supplied and installed HPL doors as part of the clinic’s interior works.

HPL stands for High-Pressure Laminate, a material used to finish the door surface. Specifying an HPL door involves more than selecting its colour: the door leaf construction, edge detailing, frame, hardware and compatibility with cleaning products also need to be considered.

Performance depends on the complete product. Scratch resistance, moisture resistance and cleaning limitations should therefore be checked against the selected manufacturer’s documentation.

For a clinic, these details help define a door package suited to its intended use and maintenance routine. Explore Daar Libya’s HPL and hospital door solutions for the available categories.

Hermetic Doors: The Importance of the Complete Opening

The Tripoli Clinic project also included hermetic doors supplied and installed by Daar Libya.

Hermetic door systems are designed to limit air leakage when closed. Their performance depends on the sealing arrangement, the frame, the relationship with the finished floor and correct adjustment of the moving components.

Where a room has specified pressure requirements, its door must be considered alongside the ventilation design. A hermetic door alone does not establish room pressure or guarantee a sterile environment.

For project planning, the required sealing performance should be defined before selecting the door system. Opening dimensions, operating controls and maintenance access are also relevant to the specification.

HPL and Hermetic Describe Different Features

HPL describes a surface material; hermetic describes a sealing function. They are not mutually exclusive categories. A door may combine an HPL finish with a hermetic closing system when designed and tested for that purpose.

This distinction makes procurement clearer. A specification should identify both the required finish and the required performance, rather than relying on a general description such as “medical door.”

Forbo Flooring and the Details Around Doorways

Forbo flooring formed part of the clinic’s medical finishing scope.

Doorways are important junctions in a flooring installation. The finished floor level, transition to the next room and connection to the door frame can affect both appearance and operation.

Flooring selection should consider the room’s use, movement of beds and trolleys, cleaning procedures and the manufacturer’s installation requirements. Product-specific properties should be confirmed for the chosen collection.

See Daar Libya’s Forbo flooring solutions in Libya. Manufacturer information is available from Forbo Flooring Systems.

Wall and Corner Protection

Daar Libya’s work at Tripoli Clinic included protection for internal walls and corners.

The areas around door openings deserve particular attention because equipment changes direction as it moves between rooms and corridors. Protection layouts should account for these movements, exposed corners and the position of door handles or opening leaves.

The height and type of protection depend on the expected contact points. These should be reviewed alongside the surrounding finishes so that protective elements do not obstruct access or door operation.

Discover Daar Libya’s wall protection systems

Patient Room Solutions from ADAM and Daar Libya

Alongside its medical finishing services, Daar Libya offers patient room solutions in collaboration with ADAM of Italy. These systems bring together modular wall components, integrated services and interior finishes, with configurations selected to suit the facility’s requirements.

Patient room planning considers the space around the bed, access for healthcare staff, personal storage, lighting and privacy. Each element should support the room’s intended use while allowing access for cleaning and maintenance.

Modular Walls and Integrated Services

ADAM’s modular patient room systems use components that can be dismantled, reconfigured or upgraded. Electrical and medical gas outlets can be incorporated within the wall system, with access to internal services for maintenance.

Available finishes include HPL, glass and other panel options, depending on the selected configuration. Materials should be specified according to the room’s requirements and the manufacturer’s technical documentation.

Explore Daar Libya’s patient room solutions for more information about the available systems.

Privacy Curtains and Bed Layout

In shared patient rooms, privacy curtains provide visual separation between beds. Their layout should allow staff to reach the patient and equipment without obstructing circulation or access to doors.

Curtain tracks need to be coordinated with ceiling fixtures, lighting and ventilation outlets. Fabric selection and cleaning or replacement procedures should follow the facility’s requirements.

The illustrated patient room shows one possible arrangement with two beds and ceiling-mounted curtains. It is a design concept rather than a photograph of the Tripoli Clinic installation.

Bedside Lighting and Storage

ADAM presents patient room configurations with integrated bedside lighting and personal storage. These elements can help organize the area around the bed while keeping frequently used items within reach.

Lighting design should distinguish between general room illumination, individual reading lights and task lighting where required. Controls and light positions should be considered from both the patient’s and the caregiver’s perspective.

Medical Flooring Around Patient Beds

Patient room flooring should be selected with bed movement, cleaning procedures and everyday use in mind. Details around walls, doorways and fixed furniture also need to be planned before installation.

Daar Libya provides Forbo flooring solutions for healthcare projects. The appropriate collection and installation method depend on the room specification; the concept image does not represent a particular Forbo product or colour.

Coordinating Ceilings, Doors and Wall Protection

A patient room functions as a complete space. Ceiling layouts need to accommodate lighting and curtain tracks, while door openings must allow the required access. Wall protection can be considered at locations exposed to contact from beds and equipment.

These requirements can be discussed alongside Daar Libya’s ceiling systems, hospital doors and wall protection solutions.

For manufacturer details, visit the official ADAM modular patient room page. To discuss a suitable configuration, contact Daar Libya with your room layouts and required scope.

Sirte Oncology Center is one of Daar Libya’s healthcare fit-out projects in Libya. The published project scope includes medical flooring, ceiling systems, wall protection, specialist medical doors, and operating-theatre and X-ray room solutions.

The project connects everyday interior finishes with more specialized clinical spaces. Each work package has its own requirements, from maintaining floor surfaces to coordinating access, services and protective construction around medical rooms.

This overview presents the project scope and introduces related solutions available through Daar Libya, including Knauf Safeboard, lead-lined doors, and modular ICU and patient room systems from ADAM of Italy.

Sirte Oncology Center: Project Overview

Product configurations, quantities and performance requirements depend on the specifications approved for each area.

Medical Flooring and Surface Maintenance

Medical flooring formed part of Daar Libya’s work at Sirte Oncology Center, with Forbo healthcare flooring included in the published project description.

Flooring decisions should account for movement through the building, cleaning procedures and the condition of the supporting substrate. Connections at walls, doorways and changes in finish also require attention.

The selected product determines the installation method and permitted cleaning routine. Properties such as slip resistance, acoustic performance or electrical conductivity should be checked for the specified collection rather than assumed for all healthcare flooring.

Explore Daar Libya’s Forbo flooring solutions. For manufacturer information, visit the English Forbo Flooring Systems website.

Wall and Corner Protection

Wall protection was another part of the centre’s interior package. Protective elements help address contact from equipment and furniture at exposed wall surfaces and corners.

Planning starts with identifying likely contact points. An exposed corner may require a dedicated guard, while a longer wall may benefit from protection positioned to suit the equipment moving beside it.

Fixings, end pieces and connections to adjacent finishes should be considered alongside appearance. The arrangement should also preserve access and avoid interference with door operation.

Learn more about Daar Libya’s wall and corner protection systems.

Healthcare Ceilings and Service Access

Ceiling systems contribute to the organization of lighting, ventilation outlets and access to services above the room.

Different areas may require different combinations of cleanability, acoustic performance and maintenance access. These requirements should be matched to the selected ceiling system and its documented properties.

Coordinating ceiling layouts with electrical and mechanical drawings helps identify access points before installation. This is particularly useful where equipment above the ceiling will need periodic inspection.

See Daar Libya’s healthcare and suspended ceiling solutions.

Operating-Theatre and X-Ray Room Solutions

The existing Sirte Oncology Center project description includes ADAM operating-theatre systems and X-ray room solutions.

For operating theatres, modular construction brings together room surfaces and associated components within a coordinated design. ADAM’s Salus system addresses floors, walls, ceilings and accessories, with the configuration developed around the room requirements.

X-ray rooms require a separate assessment of radiation shielding. Wall finishes or modular construction alone do not establish a room’s shielding performance.

Explore Daar Libya’s operating-room and X-ray room solutions and the manufacturer’s English information on ADAM modular operating rooms.

Knauf Safeboard for X-Ray Shielding

Among the specialist systems available for discussion through Daar Libya is Knauf Safeboard, a lead-free gypsum board developed for X-ray shielding.

The required barrier construction depends on the imaging equipment, operating conditions, workload and use of adjoining spaces. A qualified radiation-protection specialist should establish the shielding requirements, which are then matched to the manufacturer’s system data.

Board layers, joints, connections and service penetrations must be considered as part of the complete barrier. Safeboard should not be treated as a universal substitute for the shielding design of radiotherapy rooms.

For English-language specification assistance, consult Knauf’s official design and technical support service.

Lead-Lined Doors and Hermetic Door Systems

Daar Libya provides specialist medical door solutions, including lead-lined doors for applications with specified radiation-shielding requirements.

The complete opening matters: the door leaf, frame, connection to the surrounding barrier and any observation window must be considered together. The required shielding performance should follow the approved radiation-protection design.

Hermetic sealing serves a different function. It concerns air leakage when the door is closed, rather than radiation attenuation.

Where both functions are required, a lead-lined hermetic door can be specified with appropriate evidence for each performance requirement. A hermetic designation alone does not establish radiation protection.

Explore Daar Libya’s medical doors, hermetic doors and X-ray door solutions.

Related Solution: Modular ICU Systems from ADAM

Daar Libya also offers discussions on intensive care environments in collaboration with ADAM of Italy.

ADAM’s modular ICU concepts include privacy options, dimmable lighting, electrical outlets and medical gas outlets. The selected configuration can be developed around the bed space and the department’s operational requirements.

ICU planning should consider:

• Access to the patient and bedside equipment.
• The position of service outlets relative to the bed.
• Privacy arrangements alongside observation needs.
• Lighting controls and maintenance access.

The modular interior system forms one part of the department. Clinical equipment, ventilation and operational requirements need their own specifications and coordination.

Visit the English ADAM ICU systems page for manufacturer information.

Patient Rooms: Privacy, Lighting and Integrated Services

Patient rooms need to accommodate care, rest, personal belongings and movement around the bed. Daar Libya offers modular patient room solutions with ADAM to help organize these elements within an agreed room configuration.

ADAM describes systems with washable surfaces, reconfigurable components and provision for electrical and medical gas outlets within the wall assembly. Its examples also include integrated bedside lighting and personal storage.

Privacy Curtains in Shared Rooms

Privacy curtains provide visual separation between beds. Their positions should allow staff access and avoid obstructing circulation or door openings.

Ceiling-mounted tracks need coordination with lighting, ventilation and other ceiling services. Curtain materials and cleaning or replacement procedures should follow the facility’s requirements.

Bedside Lighting and Storage

General room lighting, reading lights and task lighting serve different purposes. Their positions and controls should be reviewed from both the patient’s and caregiver’s perspective.

Bedside storage should also be considered alongside access to outlets and equipment, keeping the room’s working areas practical and accessible.

Coordinating the Room Finishes

Flooring, doors, wall protection and ceiling elements meet within the same room. Reviewing their connections helps define details such as clearance at doorways, protection near movable beds and access to ceiling services.

Explore Daar Libya’s patient room solutions and the English ADAM modular patient room page.

Why Discuss Your Healthcare Project with Daar Libya?

Daar Libya’s work combines interior finishing with specialist healthcare systems. This allows project discussions to begin with the requirements of individual rooms and departments, then develop into clearly defined supply and installation packages.

For a project owner or consultant, useful starting information includes room schedules, drawings, door requirements and the equipment planned for specialized areas. These details help identify which systems are required and where coordination between them is needed.

Sirte Oncology Center provides an example of the company’s healthcare project experience, while each new facility requires its own specifications and scope.

Frequently Asked Questions

What work is listed for Sirte Oncology Center?

The published scope includes medical flooring, ceiling systems, wall protection, medical doors, and operating-theatre and X-ray room solutions.

Is Knauf Safeboard lead-free?

Yes. Knauf describes Safeboard as a lead-free board for X-ray shielding. The appropriate barrier construction must be determined from the shielding design and manufacturer’s technical data.

Does a hermetic door provide radiation shielding?

Not automatically. Air sealing and radiation shielding are separate requirements. A door must be specifically designed and specified for shielding where that performance is needed.

Does Daar Libya offer ICU and patient room solutions?

Yes. Daar Libya offers modular healthcare interior solutions in collaboration with ADAM of Italy. The components and services included are determined by the agreed project scope.

Discuss Your Medical Facility Requirements

For a new healthcare project or refurbishment, share your drawings, room schedule and required work packages with Daar Libya.

For X-ray areas, include equipment specifications and the approved shielding requirements when available.

Contact Daar Libya to discuss medical flooring, ceilings, wall protection, specialist doors and modular healthcare interiors.

Daar Libya delivered a coordinated range of healthcare fit-out and specialist interior solutions for Al-Bushra Clinic in Libya. The project included modular operating room systems, X-ray radiation shielding, medical flooring, hospital doors, wall protection and healthcare ceiling solutions.

Each system was selected according to the operational requirements of its space, with particular attention to hygiene, durability, cleaning, maintenance and long-term performance.

The Al-Bushra Clinic project demonstrates Daar Libya’s ability to integrate multiple healthcare systems into a complete medical environment rather than treating each product as an isolated component.

Daar Libya’s Scope of Work at Al-Bushra Clinic

The project scope included:

• Modular operating room fit-out solutions
• X-ray room radiation shielding
• Knauf Safeboard wall systems
• Forbo medical flooring
• Hermetic sliding hospital doors
• Lead-lined doors for radiology rooms
• Wall and corner protection systems
• Healthcare ceiling solutions
• Coordination between walls, floors, doors and technical services
• Finishes designed for regular cleaning and maintenance

Modular Operating Room Solutions

Operating theatres are among the most technically demanding areas within a healthcare facility. Their interiors must support effective cleaning, controlled movement and the integration of medical and building services.

For the Al-Bushra Clinic project, Daar Libya implemented a adam SRL modular operating room solution based on coordinated wall panels and specialist interior components.

Modular operating room systems can provide:

• Smooth and easy-to-clean wall surfaces
• Fewer exposed joints and dirt-trapping details
• Improved organisation of medical and technical services
• Durable finishes suitable for demanding environments
• Easier access for future inspection and maintenance
• A clean and professional operating theatre appearance
• Flexibility for future replacement or modification

Unlike conventional decorative finishes, modular systems are developed around the functional requirements of the clinical environment. Wall panels, doors, ceilings, lighting, ventilation and service points must therefore be carefully coordinated during design and installation.

Modern modular operating room solution delivered as part of Daar Libya’s healthcare fit-out services.

X-Ray Room Protection with Knauf Safeboard

Diagnostic imaging rooms require specialist wall, ceiling, door and opening treatments to reduce the transmission of X-ray radiation into neighbouring areas.

As part of the project, Knauf Safeboard was used as an X-ray shielding solution. Safeboard panels contain barium sulphate and are designed to attenuate X-rays when installed as part of a correctly specified wall or ceiling assembly.

Important benefits of Knauf Safeboard include:

• X-ray attenuation within a drylining system
• Reduced reliance on traditional sheet lead in suitable applications
• Easier handling and installation than some heavy shielding materials
• Integration with wall and ceiling construction
• A suitable surface for interior finishing
• Flexibility around architectural details and service openings

The required level of radiation protection must always be established through project-specific calculations. It depends on factors such as the imaging equipment, radiation energy, room layout, wall construction and the use of adjacent spaces.

Radiation protection also extends beyond the boards themselves. Joints, corners, service penetrations, windows, doors and frames must be treated as part of one continuous shielding envelope.

Visualisation showing X-ray radiation being contained within a room protected by a Knauf Safeboard shielding system.

How Does Knauf Safeboard Protect an X-Ray Room?

Safeboard should not be described as reflecting X-rays back into the room. Instead, its shielding components attenuate the radiation by absorbing and reducing its energy as it passes through the wall assembly.

When the system is correctly designed and installed, the amount of radiation reaching the space outside the room is reduced to the required protective level.

The number of board layers and the complete wall build-up must be determined by an appropriately qualified radiation protection specialist.

Forbo Medical Flooring

Flooring plays an important role in healthcare safety, cleaning and daily movement. Hospitals and clinics require flooring systems that can tolerate frequent traffic, wheeled equipment and regular maintenance.

Forbo flooring solutions were incorporated into the Al-Bushra Clinic fit-out according to the requirements of the different medical spaces.

Depending on the selected product and area, healthcare flooring can provide:

• A durable surface for high-traffic environments
• Easy routine cleaning and maintenance
• Welded joints for a more continuous floor finish
• Compatibility with hospital beds, trolleys and wheeled equipment
• Safety and slip-resistance options for specific areas
• A coordinated selection of colours and finishes
• Specialist solutions for rooms with additional technical requirements

The correct floor should be selected according to the actual use of each space. Traffic levels, cleaning procedures, slip resistance, rolling loads, acoustics and electrical requirements may all influence the final specification.

Learn more about Forbo flooring solutions in Libya.

Hermetic Doors for Controlled Medical Areas

Hermetic doors are designed for medical environments that require controlled airflow and reduced air leakage around the door opening.

When a hermetic sliding door reaches its closed position, its mechanism helps press the door leaf against the frame and sealing system. This creates a tighter closure than a conventional sliding door.

Benefits of hermetic hospital doors include:

• Reduced air leakage around the opening
• Support for controlled clinical environments
• Wide and accessible openings for beds and equipment
• Automatic opening options
• Easy-to-clean surfaces
• Integration with access-control systems
• Vision-panel and safety-sensor options

Hermetic doors are frequently specified for operating theatres, clean areas, laboratories and other controlled medical rooms.

Lead-Lined Doors for X-Ray Rooms

The entrance to an X-ray room must provide protection consistent with the surrounding walls. A gap in the shielding at the doorway could compromise the performance of the complete room.

Lead-lined doors contain an internal radiation-shielding layer. The required lead equivalence is determined by the approved radiation-protection design.

A complete lead-lined door solution may include:

• A shielded door leaf
• A protected frame
• Correct shielding at the wall-to-frame junction
• A lead-lined vision panel when required
• Manual or automatic operation
• Sliding or hinged configurations
• Hermetic performance where required by the room design

The door, frame and adjacent wall shielding must be coordinated as one continuous system.

Hermetic lead-lined hospital door designed for controlled access and radiation protection at an X-ray room entrance.

What Is the Difference Between a Hermetic Door and a Lead-Lined Door?

A hermetic door and a lead-lined door perform different functions.

A hermetic door is primarily designed to create a tight closure and reduce air leakage. A lead-lined door is designed to attenuate radiation at the entrance to an imaging room.

Where a room requires both airflow control and radiation protection, the two functions can be combined within one specialist door assembly.

Explore Daar Libya’s hospital door solutions in Libya.

Hospital Wall and Corner Protection

Hospital corridors, treatment areas and patient rooms are exposed to frequent contact from beds, wheelchairs, trolleys and medical equipment. Without suitable protection, repeated impacts can damage corners, wall finishes and painted surfaces.

Wall-protection systems help to:

• Reduce impact damage
• Protect vulnerable wall corners
• Preserve interior finishes
• Extend the service life of walls
• Reduce repainting and repair requirements
• Provide surfaces suitable for regular cleaning
• Maintain a professional appearance in high-traffic areas

The system may include corner guards, crash rails, wall guards, handrails and protective wall panels. Each component should be positioned according to the type of traffic and equipment used in the area.

Discover more about wall protection systems for hospitals.

Healthcare Ceiling Solutions

Ceilings in healthcare buildings must accommodate lighting, ventilation, fire-safety components and other building services while remaining suitable for the function of the room.

Important factors when selecting a healthcare ceiling include:

• Cleaning and maintenance requirements
• Humidity resistance
• Access to services above the ceiling
• Integration with lighting and ventilation
• Acoustic performance
• Fire-safety requirements
• The level of environmental control required

The ceiling specification for an operating department may differ significantly from the system used in a corridor, waiting area or administrative room. Daar Libya therefore selects ceiling solutions according to the technical requirements of each space.

Learn more about Daar Libya’s ceiling solutions in Libya.

Coordinating the Complete Healthcare Fit-Out

A successful hospital fit-out depends on how well the different systems work together.

In an X-ray room, the Safeboard wall construction must connect correctly with the lead-lined door, frame, radiation window and protected service penetrations.

In an operating theatre, modular wall panels must be coordinated with hermetic doors, ceilings, ventilation, lighting and medical services.

Medical flooring must also connect correctly with wall finishes and coving details to support cleaning and long-term maintenance.

This integrated approach helps to reduce installation conflicts, improve finish quality and make the completed healthcare environment easier to operate and maintain.

Why Choose Daar Libya for Hospital Fit-Out Projects?

Daar Libya provides specialist interior and building solutions for hospitals, clinics, diagnostic centres and other healthcare facilities across Libya.

Our services include product selection, technical coordination, supply and professional installation.

Clients choose Daar Libya for:

• Experience in healthcare and hospital projects
• Integrated solutions from one specialist provider
• Access to recognised international systems
• Professional supply and installation
• Solutions selected according to room function
• Coordination between floors, walls, ceilings and doors
• Support for projects in Tripoli, Benghazi and other Libyan cities

The Al-Bushra Clinic project reflects Daar Libya’s commitment to delivering reliable, maintainable and coordinated medical environments for the Libyan healthcare sector.

Planning a Hospital or Clinic Project in Libya?

Daar Libya provides integrated solutions for:

• Modular operating rooms
• X-ray and radiology rooms
• Radiation-shielding systems
• Forbo medical flooring
• Hermetic and lead-lined doors
• Wall and corner protection
• Healthcare ceiling systems
• Patient rooms and clinical interiors

Contact Daar Libya to discuss the technical requirements of your hospital, clinic or diagnostic-centre project in Libya.

Frequently Asked Questions

What work did Daar Libya complete at Al-Bushra Clinic?

The project included modular operating room solutions, X-ray room protection, Knauf Safeboard, Forbo medical flooring, hermetic doors, lead-lined doors, wall protection and healthcare ceiling systems.

What is Knauf Safeboard used for?

Knauf Safeboard is used in specialist wall and ceiling assemblies to attenuate X-ray radiation in diagnostic imaging and radiology rooms.

Does Safeboard reflect radiation back into the room?

No. Safeboard attenuates X-rays by absorbing and reducing their energy as they pass through the shielding assembly. It should not be described as a reflective system.

Is Knauf Safeboard a replacement for lead?

It can reduce or replace the need for sheet lead in suitable applications, but only when the complete system has been specified according to project-specific radiation calculations.

What is a modular operating room?

A modular operating room uses coordinated wall, ceiling, door and service components to create a durable and maintainable clinical environment with smooth, easy-to-clean internal surfaces.

What is the difference between hermetic and lead-lined hospital doors?

A hermetic door reduces air leakage around the opening, while a lead-lined door provides radiation shielding. Both functions can be incorporated into one door when required.

Does Daar Libya undertake hospital projects outside Tripoli?

Yes. Daar Libya provides hospital fit-out and specialist building solutions in Tripoli, Benghazi and other cities across Libya, subject to the requirements and scope of each project.

Daar Libya continues to play a key role in upgrading healthcare facilities across Libya through advanced medical construction and finishing solutions.

#DaarLibya
#AlBushraClinic
#ForboFlooring
#MedicalFlooring
#OperatingTheatre
#XRayRoom
#HealthcareProjects
#HospitalProjects
#MedicalConstruction
#LibyaHealthcare

Daar Libya supplied and installed ADAM operating room systems and Forbo medical flooring at Abu Salim Accident Hospital in Tripoli, Libya. The company’s scope covered two areas of the hospital’s interior fit-out: ADAM OT Rooms and flooring from Forbo Flooring Systems.

The project brings together specialist operating room systems and medical flooring within one healthcare facility. Each has its own installation requirements, with coordination needed where the different interior elements meet.

Abu Salim Accident Hospital: Project Overview

• Project: Abu Salim Accident Hospital.
• Location: Tripoli, Libya.
• Sector: Healthcare.
• Contractor for the works described: Daar Libya.
• Operating room systems: ADAM, Italy.
• Medical flooring: Forbo Flooring Systems.
• Scope: Supply and installation of operating room systems and medical flooring.

ADAM Operating Rooms at Abu Salim Accident Hospital

Daar Libya’s work at Abu Salim Accident Hospital included the supply and installation of operating room systems from the Italian company ADAM. This formed a principal part of the company’s contribution to the hospital, alongside the Forbo flooring installation.

ADAM provides modular solutions for operating rooms. These systems allow the room’s interior components to be considered together, with the final configuration determined by the layout, service requirements and specifications of each project.

Planning an operating room installation requires a clear understanding of the supply and installation scope, including its relationship with equipment and other building services. The project documents remain the reference for the components and technical specifications of the installed rooms.

AI-generated illustration of a modular operating room. This is not a photograph of the Abu Salim project or a specific ADAM product.

Explore Daar Libya’s operating room and X-ray room solutions for more information about this service. Manufacturer information is available on the official ADAM medical solutions website.

Understanding the OT Capsule System Concept

The operating room capsule concept presents the room as a coordinated interior enclosure. It helps explain how the structural framework, wall panels, ceiling and floor relate to one another within the surgical space.

A capsule illustration does not mean that every operating room arrives as a single finished unit. Supply, assembly and installation methods depend on the selected system and the conditions of the building.

When planning a modular room, considerations include room dimensions, access points, equipment positions, service routes and maintenance access. The project’s drawings and specifications determine how these requirements are addressed in the actual installation.

AI-generated concept illustration of an operating room capsule. It is not a construction drawing or a representation of a specific manufactured product.

Forbo Medical Flooring at Abu Salim Accident Hospital

Alongside the ADAM operating room systems, Daar Libya supplied and installed Forbo medical flooring within Abu Salim Accident Hospital.

Flooring is a daily-use surface in a healthcare facility. Selecting an appropriate system involves considering the function of the space, pedestrian and equipment movement, cleaning requirements, maintenance and the condition of the underlying surface.

Forbo offers different flooring products with different compositions, characteristics and applications. Technical properties, installation instructions and maintenance guidance must therefore be checked for the particular product selected, rather than assumed to apply across the entire range.

Forbo flooring represents one of the two areas of Daar Libya’s work documented in this project, together with the Italian operating room systems.

AI-generated illustration of healthcare flooring. This is not a photograph of the project or a specific Forbo product.

Discover Daar Libya’s medical flooring and Forbo solutions. For manufacturer product information and technical resources, visit the official Forbo Flooring Systems website.

Coordinating Operating Room Systems and Flooring

The Abu Salim project brings together two areas of interior fit-out, with interfaces that require coordination between the room systems and flooring.

When planning similar installations, relevant details include floor levels, floor-to-wall junctions, transitions at doorways and the sequence of installation work. Defining these interfaces helps clarify responsibilities and the relationship between each part of the scope.

Daar Libya’s contribution to Abu Salim Accident Hospital demonstrates a specific area of its healthcare project experience: supplying and installing ADAM operating room systems and Forbo medical flooring within a hospital in Tripoli.

Frequently Asked Questions

What work did Daar Libya carry out at Abu Salim Accident Hospital?

Daar Libya supplied and installed ADAM operating room systems and Forbo medical flooring at the hospital in Tripoli, Libya.

Who manufactured the operating room systems?

The operating room systems described in this project are from ADAM, an Italian company providing modular healthcare interior solutions.

Which flooring brand was used?

The flooring included in Daar Libya’s documented scope is from Forbo Flooring Systems.

Do the accompanying images show the actual hospital installation?

No. The accompanying images are AI-generated illustrations explaining operating room, capsule and medical flooring concepts. They do not document the project site or represent specific ADAM or Forbo product models.

Discuss Your Operating Room and Flooring Requirements

If you are planning operating room systems or medical flooring for a hospital or clinic, share the project location, available drawings and proposed scope with Daar Libya.

Contact Daar Libya to discuss your requirements and the technical information needed to assess the supply and installation work.

Daar Libya continues to support healthcare infrastructure projects across Libya through advanced medical construction and hospital finishing solutions.

#DaarLibya
#AbuSalimEmergencyHospital
#ForboFlooring
#MedicalFlooring
#OperatingTheatre
#OTRoom
#HealthcareProjects
#HospitalProjects
#MedicalConstruction
#LibyaHealthcare

Daar Libya carried out specialist healthcare fit-out works at Al Karam International Hospital, including ADAM operating room systems with the components included in the project scope, Forbo Sphera SD and EC operating room flooring, protective wall cladding, hermetic medical doors and HPL doors with antibacterial surfaces.

The project connects the operating room enclosure with its surrounding finishes—from static-control flooring to wall protection and medical entrances. This article outlines Daar Libya’s contribution, the purpose of each system and the relationship between these interior elements.

Daar Libya’s Work at Al Karam International Hospital

The project scope included:

• Italian ADAM operating room systems.
• Forbo Sphera SD and Sphera EC flooring for operating rooms.
• Wall cladding and wall protection systems.
• Hermetic medical doors.
• HPL doors with antibacterial surfaces.

ADAM Operating Rooms and the Modular Capsule System

Daar Libya’s work included ADAM operating room systems, together with the room components and accessories specified for the project. The modular capsule concept coordinates the walls, ceiling, floor, doors and associated services within one interior environment.

ADAM’s Salus system follows this approach through a metal substructure, prefabricated panels and junction details around the room enclosure. Different configurations accommodate the available space and required equipment.

AI-generated illustration of a modular operating room capsule. It is not a photograph of Al Karam International Hospital or an exact representation of an ADAM product.

System Components and Integration Options

The ADAM system family provides solutions for the supporting structure, panels, ceiling and doors. Available options include integrated lighting, airflow units, control panels, cabinets and medical image display accessories. The room design determines which components are selected and where they are positioned.

Panel material options include glass, powder-coated steel, stainless steel and HPL. Removable panels also support access to services behind the walls for maintenance and alterations.

Consult the official ADAM Salus system specifications and ADAM’s guide to modular room benefits for manufacturer information.

Explore Daar Libya’s operating room and X-ray room solutions for details of the company’s related services.

Forbo Sphera SD and EC Operating Room Flooring

The flooring works at Al Karam International Hospital included Forbo Sphera SD and EC for operating rooms, providing specialist options for controlling electrostatic discharge.

The two products have different electrical characteristics:

• Sphera SD: homogeneous vinyl flooring with static-dissipative properties.
• Sphera EC: homogeneous vinyl flooring with electrostatic-conductive properties.

Product selection and allocation depend on the technical requirements of each space. Electrical performance also depends on the installation system, required connections, manufacturer instructions and verification testing. It cannot be established from the floor’s appearance alone.

AI-generated operating room illustration. It does not document the installed products or demonstrate the floor’s electrical performance.

The official Forbo Sphera SD and EC page provides technical specifications and installation, cleaning and maintenance guidance.

For information about supply and installation services, visit Daar Libya’s medical flooring solutions.

Protective Wall Cladding

Daar Libya’s scope included wall cladding using wall protection systems, adding a protective surface in areas exposed to contact and repeated use.

Cladding needs to be considered alongside its junctions with door frames, corners and skirtings. These locations bring different materials together and affect the continuity of the finish, cleaning access and maintenance.

Protective cladding and a modular operating room structure serve different purposes. Cladding protects the wall surface, while a modular system provides an interior structure that can accommodate services and accessories according to its configuration.

Learn more about Daar Libya’s wall cladding and protection systems.

Hermetic Medical Doors and Antibacterial HPL Doors

The Al Karam International Hospital works included hermetic doors and HPL doors with antibacterial surfaces, according to the specifications of the products selected for the project.

These characteristics address different requirements. Hermetic performance concerns the complete door assembly when closed, while antibacterial properties relate to the surface material or treatment and the product’s supporting test results.

Hermetic Doors

Hermetic doors are used where the room design requires control of air leakage through an entrance. Their performance depends on the coordinated door leaf, frame, seals and operating mechanism, alongside the room’s ventilation and pressure requirements.

HPL Doors

HPL doors provide a practical surface finish with different colour and appearance options. The doors selected for this project include antibacterial surfaces. This is a characteristic of the specified product, rather than an automatic property of every HPL door.

Routine cleaning and disinfection remain necessary even when antibacterial surfaces are used.

AI-generated illustration of wall, door and floor details. It does not document the installation or verify the materials’ technical properties.

Explore Daar Libya’s medical, hermetic and HPL door solutions for information about the available service scope.

Connecting the Room Enclosure and Interior Finishes

Coordination is particularly relevant at the interfaces between systems: floor-to-wall junctions, cladding around door frames, accessories integrated into panels and access routes for service maintenance.

Al Karam International Hospital illustrates a fit-out scope that brings operating room systems together with the surfaces around them. Each product has a defined function, while the completed space depends on how the adjoining elements are arranged.

Frequently Asked Questions

What work did Daar Libya carry out at Al Karam International Hospital?

The scope included ADAM operating room systems, Forbo Sphera SD and EC flooring, protective wall cladding, hermetic doors and HPL doors with antibacterial surfaces.

What is the difference between Sphera SD and Sphera EC?

Sphera SD has static-dissipative properties, while Sphera EC has electrostatic-conductive properties. The appropriate product is selected according to the approved requirements for each space.

Do antibacterial doors eliminate the need for cleaning?

No. Antibacterial surface properties complement the specified care procedures and do not replace routine cleaning and disinfection.

Discuss Your Healthcare Fit-Out Project

If your project requires operating rooms, static-control flooring, protective wall cladding or medical doors, share the available drawings, proposed scope and product requirements with Daar Libya.

Contact Daar Libya to discuss your project and the coordination between room systems, flooring, walls and doors.

#DaarLibya
#AlKaramInternationalHospital
#ForboFlooring
#MedicalFlooring
#WallProtection
#HandrailSystems
#CornerProtection
#HPLDoors
#HermeticSlidingDoors
#HealthcareProjects
#HospitalProjects
#MedicalConstruction
#LibyaHealthcare