Tripoli Clinic’s healthcare fit-out included the supply and installation of HPL doors and hermetic doors by Daar Libya, alongside Forbo flooring, wall protection and ceiling works.

The project brings together two closely connected aspects of medical interiors: the systems people move through and the surfaces they use every day. Door openings, floor finishes, protective wall elements and ceilings each have their own requirements, while their connections need careful consideration.

Tripoli Clinic Project Scope

The following sections explain these work packages and the considerations behind them. ADAM patient rooms are also introduced as a related solution available through Daar Libya.

HPL Doors Supplied and Installed at Tripoli Clinic

Daar Libya supplied and installed HPL doors as part of the clinic’s interior works.

HPL stands for High-Pressure Laminate, a material used to finish the door surface. Specifying an HPL door involves more than selecting its colour: the door leaf construction, edge detailing, frame, hardware and compatibility with cleaning products also need to be considered.

Performance depends on the complete product. Scratch resistance, moisture resistance and cleaning limitations should therefore be checked against the selected manufacturer’s documentation.

For a clinic, these details help define a door package suited to its intended use and maintenance routine. Explore Daar Libya’s HPL and hospital door solutions for the available categories.

Hermetic Doors: The Importance of the Complete Opening

The Tripoli Clinic project also included hermetic doors supplied and installed by Daar Libya.

Hermetic door systems are designed to limit air leakage when closed. Their performance depends on the sealing arrangement, the frame, the relationship with the finished floor and correct adjustment of the moving components.

Where a room has specified pressure requirements, its door must be considered alongside the ventilation design. A hermetic door alone does not establish room pressure or guarantee a sterile environment.

For project planning, the required sealing performance should be defined before selecting the door system. Opening dimensions, operating controls and maintenance access are also relevant to the specification.

HPL and Hermetic Describe Different Features

HPL describes a surface material; hermetic describes a sealing function. They are not mutually exclusive categories. A door may combine an HPL finish with a hermetic closing system when designed and tested for that purpose.

This distinction makes procurement clearer. A specification should identify both the required finish and the required performance, rather than relying on a general description such as “medical door.”

Forbo Flooring and the Details Around Doorways

Forbo flooring formed part of the clinic’s medical finishing scope.

Doorways are important junctions in a flooring installation. The finished floor level, transition to the next room and connection to the door frame can affect both appearance and operation.

Flooring selection should consider the room’s use, movement of beds and trolleys, cleaning procedures and the manufacturer’s installation requirements. Product-specific properties should be confirmed for the chosen collection.

See Daar Libya’s Forbo flooring solutions in Libya. Manufacturer information is available from Forbo Flooring Systems.

Wall and Corner Protection

Daar Libya’s work at Tripoli Clinic included protection for internal walls and corners.

The areas around door openings deserve particular attention because equipment changes direction as it moves between rooms and corridors. Protection layouts should account for these movements, exposed corners and the position of door handles or opening leaves.

The height and type of protection depend on the expected contact points. These should be reviewed alongside the surrounding finishes so that protective elements do not obstruct access or door operation.

Discover Daar Libya’s wall protection systems

Patient Room Solutions from ADAM and Daar Libya

Alongside its medical finishing services, Daar Libya offers patient room solutions in collaboration with ADAM of Italy. These systems bring together modular wall components, integrated services and interior finishes, with configurations selected to suit the facility’s requirements.

Patient room planning considers the space around the bed, access for healthcare staff, personal storage, lighting and privacy. Each element should support the room’s intended use while allowing access for cleaning and maintenance.

Modular Walls and Integrated Services

ADAM’s modular patient room systems use components that can be dismantled, reconfigured or upgraded. Electrical and medical gas outlets can be incorporated within the wall system, with access to internal services for maintenance.

Available finishes include HPL, glass and other panel options, depending on the selected configuration. Materials should be specified according to the room’s requirements and the manufacturer’s technical documentation.

Explore Daar Libya’s patient room solutions for more information about the available systems.

Privacy Curtains and Bed Layout

In shared patient rooms, privacy curtains provide visual separation between beds. Their layout should allow staff to reach the patient and equipment without obstructing circulation or access to doors.

Curtain tracks need to be coordinated with ceiling fixtures, lighting and ventilation outlets. Fabric selection and cleaning or replacement procedures should follow the facility’s requirements.

The illustrated patient room shows one possible arrangement with two beds and ceiling-mounted curtains. It is a design concept rather than a photograph of the Tripoli Clinic installation.

Bedside Lighting and Storage

ADAM presents patient room configurations with integrated bedside lighting and personal storage. These elements can help organize the area around the bed while keeping frequently used items within reach.

Lighting design should distinguish between general room illumination, individual reading lights and task lighting where required. Controls and light positions should be considered from both the patient’s and the caregiver’s perspective.

Medical Flooring Around Patient Beds

Patient room flooring should be selected with bed movement, cleaning procedures and everyday use in mind. Details around walls, doorways and fixed furniture also need to be planned before installation.

Daar Libya provides Forbo flooring solutions for healthcare projects. The appropriate collection and installation method depend on the room specification; the concept image does not represent a particular Forbo product or colour.

Coordinating Ceilings, Doors and Wall Protection

A patient room functions as a complete space. Ceiling layouts need to accommodate lighting and curtain tracks, while door openings must allow the required access. Wall protection can be considered at locations exposed to contact from beds and equipment.

These requirements can be discussed alongside Daar Libya’s ceiling systems, hospital doors and wall protection solutions.

For manufacturer details, visit the official ADAM modular patient room page. To discuss a suitable configuration, contact Daar Libya with your room layouts and required scope.

Sirte Oncology Center is one of Daar Libya’s healthcare fit-out projects in Libya. The published project scope includes medical flooring, ceiling systems, wall protection, specialist medical doors, and operating-theatre and X-ray room solutions.

The project connects everyday interior finishes with more specialized clinical spaces. Each work package has its own requirements, from maintaining floor surfaces to coordinating access, services and protective construction around medical rooms.

This overview presents the project scope and introduces related solutions available through Daar Libya, including Knauf Safeboard, lead-lined doors, and modular ICU and patient room systems from ADAM of Italy.

Sirte Oncology Center: Project Overview

Product configurations, quantities and performance requirements depend on the specifications approved for each area.

Medical Flooring and Surface Maintenance

Medical flooring formed part of Daar Libya’s work at Sirte Oncology Center, with Forbo healthcare flooring included in the published project description.

Flooring decisions should account for movement through the building, cleaning procedures and the condition of the supporting substrate. Connections at walls, doorways and changes in finish also require attention.

The selected product determines the installation method and permitted cleaning routine. Properties such as slip resistance, acoustic performance or electrical conductivity should be checked for the specified collection rather than assumed for all healthcare flooring.

Explore Daar Libya’s Forbo flooring solutions. For manufacturer information, visit the English Forbo Flooring Systems website.

Wall and Corner Protection

Wall protection was another part of the centre’s interior package. Protective elements help address contact from equipment and furniture at exposed wall surfaces and corners.

Planning starts with identifying likely contact points. An exposed corner may require a dedicated guard, while a longer wall may benefit from protection positioned to suit the equipment moving beside it.

Fixings, end pieces and connections to adjacent finishes should be considered alongside appearance. The arrangement should also preserve access and avoid interference with door operation.

Learn more about Daar Libya’s wall and corner protection systems.

Healthcare Ceilings and Service Access

Ceiling systems contribute to the organization of lighting, ventilation outlets and access to services above the room.

Different areas may require different combinations of cleanability, acoustic performance and maintenance access. These requirements should be matched to the selected ceiling system and its documented properties.

Coordinating ceiling layouts with electrical and mechanical drawings helps identify access points before installation. This is particularly useful where equipment above the ceiling will need periodic inspection.

See Daar Libya’s healthcare and suspended ceiling solutions.

Operating-Theatre and X-Ray Room Solutions

The existing Sirte Oncology Center project description includes ADAM operating-theatre systems and X-ray room solutions.

For operating theatres, modular construction brings together room surfaces and associated components within a coordinated design. ADAM’s Salus system addresses floors, walls, ceilings and accessories, with the configuration developed around the room requirements.

X-ray rooms require a separate assessment of radiation shielding. Wall finishes or modular construction alone do not establish a room’s shielding performance.

Explore Daar Libya’s operating-room and X-ray room solutions and the manufacturer’s English information on ADAM modular operating rooms.

Knauf Safeboard for X-Ray Shielding

Among the specialist systems available for discussion through Daar Libya is Knauf Safeboard, a lead-free gypsum board developed for X-ray shielding.

The required barrier construction depends on the imaging equipment, operating conditions, workload and use of adjoining spaces. A qualified radiation-protection specialist should establish the shielding requirements, which are then matched to the manufacturer’s system data.

Board layers, joints, connections and service penetrations must be considered as part of the complete barrier. Safeboard should not be treated as a universal substitute for the shielding design of radiotherapy rooms.

For English-language specification assistance, consult Knauf’s official design and technical support service.

Lead-Lined Doors and Hermetic Door Systems

Daar Libya provides specialist medical door solutions, including lead-lined doors for applications with specified radiation-shielding requirements.

The complete opening matters: the door leaf, frame, connection to the surrounding barrier and any observation window must be considered together. The required shielding performance should follow the approved radiation-protection design.

Hermetic sealing serves a different function. It concerns air leakage when the door is closed, rather than radiation attenuation.

Where both functions are required, a lead-lined hermetic door can be specified with appropriate evidence for each performance requirement. A hermetic designation alone does not establish radiation protection.

Explore Daar Libya’s medical doors, hermetic doors and X-ray door solutions.

Related Solution: Modular ICU Systems from ADAM

Daar Libya also offers discussions on intensive care environments in collaboration with ADAM of Italy.

ADAM’s modular ICU concepts include privacy options, dimmable lighting, electrical outlets and medical gas outlets. The selected configuration can be developed around the bed space and the department’s operational requirements.

ICU planning should consider:

• Access to the patient and bedside equipment.
• The position of service outlets relative to the bed.
• Privacy arrangements alongside observation needs.
• Lighting controls and maintenance access.

The modular interior system forms one part of the department. Clinical equipment, ventilation and operational requirements need their own specifications and coordination.

Visit the English ADAM ICU systems page for manufacturer information.

Patient Rooms: Privacy, Lighting and Integrated Services

Patient rooms need to accommodate care, rest, personal belongings and movement around the bed. Daar Libya offers modular patient room solutions with ADAM to help organize these elements within an agreed room configuration.

ADAM describes systems with washable surfaces, reconfigurable components and provision for electrical and medical gas outlets within the wall assembly. Its examples also include integrated bedside lighting and personal storage.

Privacy Curtains in Shared Rooms

Privacy curtains provide visual separation between beds. Their positions should allow staff access and avoid obstructing circulation or door openings.

Ceiling-mounted tracks need coordination with lighting, ventilation and other ceiling services. Curtain materials and cleaning or replacement procedures should follow the facility’s requirements.

Bedside Lighting and Storage

General room lighting, reading lights and task lighting serve different purposes. Their positions and controls should be reviewed from both the patient’s and caregiver’s perspective.

Bedside storage should also be considered alongside access to outlets and equipment, keeping the room’s working areas practical and accessible.

Coordinating the Room Finishes

Flooring, doors, wall protection and ceiling elements meet within the same room. Reviewing their connections helps define details such as clearance at doorways, protection near movable beds and access to ceiling services.

Explore Daar Libya’s patient room solutions and the English ADAM modular patient room page.

Why Discuss Your Healthcare Project with Daar Libya?

Daar Libya’s work combines interior finishing with specialist healthcare systems. This allows project discussions to begin with the requirements of individual rooms and departments, then develop into clearly defined supply and installation packages.

For a project owner or consultant, useful starting information includes room schedules, drawings, door requirements and the equipment planned for specialized areas. These details help identify which systems are required and where coordination between them is needed.

Sirte Oncology Center provides an example of the company’s healthcare project experience, while each new facility requires its own specifications and scope.

Frequently Asked Questions

What work is listed for Sirte Oncology Center?

The published scope includes medical flooring, ceiling systems, wall protection, medical doors, and operating-theatre and X-ray room solutions.

Is Knauf Safeboard lead-free?

Yes. Knauf describes Safeboard as a lead-free board for X-ray shielding. The appropriate barrier construction must be determined from the shielding design and manufacturer’s technical data.

Does a hermetic door provide radiation shielding?

Not automatically. Air sealing and radiation shielding are separate requirements. A door must be specifically designed and specified for shielding where that performance is needed.

Does Daar Libya offer ICU and patient room solutions?

Yes. Daar Libya offers modular healthcare interior solutions in collaboration with ADAM of Italy. The components and services included are determined by the agreed project scope.

Discuss Your Medical Facility Requirements

For a new healthcare project or refurbishment, share your drawings, room schedule and required work packages with Daar Libya.

For X-ray areas, include equipment specifications and the approved shielding requirements when available.

Contact Daar Libya to discuss medical flooring, ceilings, wall protection, specialist doors and modular healthcare interiors.